|
 |
|
BRICKWORK ACCESSORIES |
|
| BRICK REINFORCMENT |
| |
Our range of Masonry Reinforcement meets the ever increasing requirements of today's specifiers and complies fully with BS 5628 part 2.
|
| |
| |
BUILDTRAK ONE
Buildtrak One is designed specifically as a structural product for laterally loaded panels, however, it also offers excellent crack control properties. Available in galvanised & stainless steel grade 304 S15 in 3.15m lengths in any width.
BUILDTRAK TWO
Buildtrak Two is designed for use in double leaf collar jointed walls, it also alleviates the problems inherent with the use of large blocks
by allowing the contractor to tie two smaller blocks together. It is manufactured in galvanised &stainless steel grade 304 S15 with 4mm diameter flattened main wires and 20 x 3mm flat cross ties.
Available in 3.1 5m lengths in any width.
BUILDTRAK THREE
Buildtrak Three is designed to reinforce both leaves of a cavity wall
whilst incorporating and placing the brick tie at accurate 450mm centres. Available with both round wire and 20x3mm flat ties with drip.
Manufactured from galvanised & stainless steel grade 304 S15.
Available in 3.1 5m lengths in any width.
|
|
|
| |
BRICK MESH
Ideally suited to the bonding and strengthening of brickwork and blockwork etc. Stainless steel is always recommended where reinforcement is to be used in either the inner or outer leaf of a cavity wall, external solid wall or below DPC level or footings. Assists in distributing the loads evenly and reduces the possibility of cracking.
|
|
|
| |
| |
|
|
.jpg){kind=link}
.jpg){kind=link}