|
 |
|
MOULD OILS, CURING AND FORM TREATMENTS |
|
MOULD RELEASE AGENTS
CHEMICAL RELEASE AGENTS
A blend of fatty acids in an evaporative carrier which provide a stain free concrete finish of the highest quality with excellent strip. Listed by WBS for drinking water projects. Spray applied to all types of impermeable formwork to give superior concrete finish and release.
BCA Category 5.
MOULD OILS WITH SURFACTANTS
A special blend of oils with highly active surfactants which give excellent release with no staining BCA category 2 All types of commonly used formwork but particularly sealed or unsealed plywood. Produces stain free surfaces.
ENVIRONMENTALLY FRIENDLY
Environmentally safe mould release oil (BCA Category 2/5) Solution of vegetable oils with a blend of fatty acids that provide a stain free concrete finish of the highest quality with excellent strip.
CONCRETE CURING AID Water based Curing Agent
Aqueous silicate solution that reacts to deposit an integral layer of high cohesive strength crystals to provide a permanent membrane. WBS Listed for drinking water projects. Low cost general purpose curing. Will not restrict bond of subsequent coatings intended for use with concrete. Available in Fugitive Dye Tinted form to suit specification and improve visual indication of application.
CONCRETE CURING MEMBRANE
RESIN BASED CURING COMPOUND
OF 90% EFFICIENCY
Solution of inert resins in evaporative solvents with a higher curing efficiency. WBS listed for drinking water projects. Available in aluminium version for use in strong sunlight conditions and where DTp stipulate aluminised for highways, bridges, runways, etc.
COMBINED CURING AGENT AND SEALER
75% curing efficiency to ASTM C390 A single pack acrylic coating which cures and seals interior and exterior concrete surfaces to produce a harder wearing surface and eliminate dusting.
|
| |
| |
|
|
