 |
|
FORMWORK ACCESSORIES |
|
DYWIDAG TIE ROD BAR
Dywidag Formwork Tie Rod bars are available in two diameters 15 and 20mm. The bars are stocked in 7.5 lengths which can be cut to suit. |
|
 |
| |
|
|
|
| |
CONES
These cones are used at the ends of the thruty sleeve and can be easily extracted after removal of formwork, to form a chamfered recess for subsequent grouting. |
|
|
| |
|
|
| |
AQUAFIX
Aquafix is a stopper made in a from resilient synthetic material (non biodegradable).
Where grouting is necessary. holes:- 22, and 26. |
|
 |
| |
|
|
|
| |
RIGID SLEEVE
This sleeve is a rigid PVC tube, supplied in 2 metre lengths which can be easily cut to the required size. Also acting as a spacer to ensure correct width of wall. |
|
Tube
i / d - o / d |
20 / 24 |
22 / 26 |
26 / 30 |
|
| |
|
|
| |
FLEXIBLE HOSE
Flexible PVC hose is supplied in convenient 30 metre coils as a cheap alternative to bolt sleeve which can be extracted after use.
For sealing tie holes refer to Tie Seal and Aquafix. |
|
Tube
i / d - o / d |
19 / 25 |
25 / 31 |
|
| |
|
|
| |
FORMWORK CLAMPS
Formwork clamps are used with mild steel rods up to 10mm dia., and provide a cheap, effective clamping system that has no nuts or bolts and leaves no expensive ties in the concrete.
FOR PURCHASE OR HIRE. |
|
 |
| |
|
|
|
| |
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}